No tengo conectado el SSD que tenía como arranque para compararlo, mi home lo tengo en sdb y mi almacenamiento masivo en sda ambos HDD el primero de 7200RPM y el segundo de 5425RPM todo movido usando Clonezilla [1], que en realidad pude usar dd o gparted pero me dio fiaca, este es mi desktop en casa.
tostador:~# hdparm -tT /dev/sda
/dev/sda:
Timing cached reads: 18472 MB in 1.99 seconds = 9295.67 MB/sec
Timing buffered disk reads: 566 MB in 3.01 seconds = 188.27 MB/sec
tostador:~# hdparm -tT /dev/sdb
/dev/sdb:
Timing cached reads: 19562 MB in 1.99 seconds = 9850.27 MB/sec
Timing buffered disk reads: 446 MB in 3.01 seconds = 148.21 MB/sec
tostador:~# hdparm -tT /dev/nvme0
/dev/nvme0n1p1:
Timing cached reads: 19778 MB in 1.99 seconds = 9958.08 MB/sec
Timing buffered disk reads: 5676 MB in 3.00 seconds = 1891.21 MB/sec
tostador:~# smartctl -i /dev/nvme0
smartctl 7.3 2022-02-28 r5338 [x86_64-linux-6.1.0-16-amd64] (local build)
Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Number: KINGSTON SNV2S500G
Firmware Version: SBI02102
PCI Vendor/Subsystem ID: 0x2646
IEEE OUI Identifier: 0x0026b7
Controller ID: 1
NVMe Version: 1.4
Number of Namespaces: 1
Namespace 1 Size/Capacity: 500,107,862,016 [500 GB]
Namespace 1 Formatted LBA Size: 512
Local Time is: Wed Dec 27 17:14:15 2023 CST
tostador:~# smartctl -i /dev/sda
smartctl 7.3 2022-02-28 r5338 [x86_64-linux-6.1.0-16-amd64] (local build)
Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Seagate BarraCuda 3.5 (CMR)
Device Model: ST2000DM006-2DM164
LU WWN Device Id: 5 000c50 0a2e1f4fd
Firmware Version: CC26
User Capacity: 2,000,398,934,016 bytes [2.00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 7200 rpm
Form Factor: 3.5 inches
Device is: In smartctl database 7.3/5319
ATA Version is: ACS-2, ACS-3 T13/2161-D revision 3b
SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Wed Dec 27 17:14:34 2023 CST
SMART support is: Available – device has SMART capability.
SMART support is: Enabled
tostador:~# smartctl -i /dev/sdb
smartctl 7.3 2022-02-28 r5338 [x86_64-linux-6.1.0-16-amd64] (local build)
Copyright (C) 2002-22, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Seagate BarraCuda 3.5 (SMR)
Device Model: ST8000DM004-2CX188
LU WWN Device Id: 5 000c50 0c2b452d2
Firmware Version: 0001
User Capacity: 8,001,563,222,016 bytes [8.00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 5425 rpm
Form Factor: 3.5 inches
Device is: In smartctl database 7.3/5319
ATA Version is: ACS-3 T13/2161-D revision 5
SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Wed Dec 27 17:14:37 2023 CST
SMART support is: Available – device has SMART capability.
SMART support is: Enabled
[1] http://www.clonezilla.org/
